|
|
Build Your Online Product Catalogs?
| Product Name: |
Continuous Casting Mold Level Control Sys
|
| Supply Ability: |
|
| Related proudcts |
|
| Specifications |
MLC-V235 |
| Price Term: |
EXW |
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
Overview
The automatic control for the molten steel level of the mold is one of the key technologies of continuous casting production. It is very important to reduce the labor intensity of workers, improve production efficiency, improve the quality and output of casting billet, reduce overflow and breakout of steel and improve the management level of steelmaking and continuous casting.
The molten steel is poured into the mold. In order to prevent overflow, the molten steel level must be kept stable. Otherwise, during the casting process, if the level will fluctuate too much, and slag will be involved, forming surface slag inclusion on the surface of the casting billet, affecting the quality of the billet. The test points out that the relationship between the level fluctuation and the depth of casting billet surface slag inclusion is as follows:
The experience has shown that surface slag inclusions can be eliminated when the level fluctuation is within ¡À10mm. At the same time, if the level fluctuation is more than 10mm, the rate of longitudinal cracks on the casting billet surface is 30%. It means that the level fluctuation directly affects the surface quality of the casting billet.
The principle of the system
The eddy current type molten steel level gauge is the key to the system. The system operates reliably and has excellent performance: high temperature resistance, strong anti-interference ability, fast dynamic response (lag time <0.10s), high ***ection accuracy (<¡À05mm), and large measurement range (0-150mm). The selected electromagnetic field frequency ensures that the level ***ection probe only ***ects the level change of the mold and does not ***ect the mold flux or steel slag layer. The system has the advantages of simple operation and no radiation protection problems. The system is insensitive to argon blowing, and its sensors can be mounted on the tundish car or on the platform.
The sensor is cooled by compressed air during use.
The principle is shown in th |
| Company: |
Wuhan CenterRise M&C Engineering CO., Ltd.
|
| Contact: |
Ms. Floria Liang |
| Address: |
No. 8 Xinhua |
| Postcode: |
|
| Tel: |
+8613995588597 |
| Fax: |
|
| E-mail: |
|
|
|
|
Home
